Classification according to shape
- Round diamond saw blades
Round diamond saw blades are commonly used saw cutting tools. The diameter span is large, from several millimeters of sculpture to a large saw blade with a few meters diameter. The size of the block is also very different. Therefore, its processing and manufacturing methods, the quality of the diamond abrasives used, and the formation of the combined agent and the requirements are different.
2. The main cutting object of the row saw is stone, including various natural marble, easy -to -cut granite, and artificial marble.
3. Diamond Band saw -mainly used as a cutting of graphite electrode, and it is also used for cutting of alien stone. The diamond tooth with a saw cannot be done too much, because the zing of the ribbon should be wrapped on the flywheel to perform deflection, and the sawtooth will break from the welding mouth when bending.
4. Diamond Rope saw -building removal, division of large stone or cement blocks, cutting of alien stone, and even cutting of large steel cables.
5, wire saw -a simple hand sawing tool, which is plated with diamond powder on a steel wire (generally quenching steel wire). For processing of jade and stone crafts.
6. Chain saw
Classified by manufacturing method
- Electroplating saw blades
This is the method of making diamond circular cutting saws, and it is also used for the manufacture of thin outer round saw tablets, rope sawnuts, silk saws, etc.
The characteristic of the electroplating saw is that the binding agent of the diamond is very firm. The diamond stone is good, and the height of the blade can be adjusted. Therefore, cutting sharpness, good durability, low manufacturing cost, and strong applicability.
- Rolling saw blades
Diamond is located in the gap between the outer circle of the saw tablet. The matrix is a softer carbon steel, with diameterφ100-120mm and a thickness of about 0.20 ~ 0.40mm. Generally used for the composition of clock gems.
- Tooth-setting saw
This kind of saw blade is mostly bronze-binding agent, which is manufactured by cold-pressed sintering processes. Vajra tooth is long or i-shaped, which can be pressed directly, or first pressed into a tooth and then packed into the altar around the circle. This kind of saw blade is mainly used for slices such as glass, crystal, etc., and is also used for cutting edges of marble and water mills.
- Welding saw blades
Wide saw blade manufacturing method, which is also a type of sawing piece for most of the stone processing. For example, the stone processing of the stone, the row saw, etc., are first made into a jagged block, and then welded the block to the steel base by welding.
- Squeeze the saw blades
This kind of saw blade is also an outer cut -cut cutting saw blade, which is similar to rolling saw tablets. Diamond saw blade is also located in the gap around the outer circle of the substrate. many. The diameter of the saw tablet can beφ500mm or even larger. This kind of saw blade is mostly used in crafts such as jade, gemstones, shells and other crafts. There are broad markets in Hong Kong and Southeast Asia.
